USE ON ABDOMEN, HIPS, THIGHS, WAIST, BACK, ARMS
INFRARED BODY SHAPER, INFRARED HEATING THERAPY
In addition to digital temperature and time controls and Space Carbon fiber construction, the INFRA SPA Sauna Belt ANP1D has upgraded features such as continuous 8.3" height (does not taper like the ANP-1DS ), an extended heating area, and soft padding extended to cover the entire belt span.
The digital controls for the INFRA SPA Sauna Belt ANP1D are operated by a microprocessor, housed in a cleanly-designed and easy-to-use control panel.
The solid one-piece belt, of PU (polyurethane), nylon and space carbon fiber, features durability, and a comfortable, enclosing coverage for any wearer. The INFRA SPA Sauna Belt ANP1D is a great choice for reliability, coverage and ease of use.
Good adjunct to weight loss program, sweats away pounds
Provides muscle tension relief in stiff, sore muscles
Relaxes muscles, reduces muscle spasms
Provides soothing warm comfort
Gentle, yet penetrating infrared heat permeates deeper into tissue than conventional electric heat
DIGITAL INFRA SPA SAUNA BELT ANP-1D FEATURES:
Easy and convenient to operate
Precise temperature and time control operated by microprocessor
Advanced Far Infrared Radiation wave heating technology enhances the heating effect.
HOW TO USE THE INFRA SPA SAUNA BELT ANP-1D:
Wrap the belt around the belly or chosen body part.If a massage or body oil is used, you need to first wrap the body part with a plastic sheet to protect the Sauna Belt.
IMPORTANT: Wear belt a little loose, and never doubled-up. See below.
Next insert the plug into the main power socket.
USING THE INFRA SPA SAUNA BELT ANP-1D DIGITAL CONTROL PANEL:
Press this button to adjust temperature and time.
Display temperature. Press ' ' button to increase or ' ' button to decrease the temperature, 1 level for each time pressed. The temperature has 9 levels ranging from 35 °C~ 60 °C. The default temperature is level 5.
Time Set :
Display time. Press ' ' button one time to increase 5 minutes or ' ' button to decrease 5 minutes for each time pressed. The time ranges from 5 to 60 minutes. The default time is 30 minutes.
Press this button to start the device after setting the time and temperature.
Heating Light (green): This light will be on when the device is heating and will be off when the device is not working.
Wear the belt a little loose. A tight belt can overheat the skin.
2. Never allow the belt to double-up or scrunch up. Doubled-up belt fabric can cause extreme overheating and damage to the belt. Avoid tightness of belt or body positions that can fold the belt over.
INFRA SPA SAUNA BELT ANP-1D TECHNICAL SPECIFICATIONS:
AC100 -120V 60Hz 80W
Made of Nylon, covered by a layer of PU (polyurethane) fabric, with heating elements of carbon fiber
Dimensions (End to End)
Width x Length : 21x 122 (cm) / 8.3 x 48 (inches)
Approx. 250 square inches
9 levels (35°C~60°C /
95 °F~ 140°F)
*Actual temperature may vary when in use
Safety and Efficiency are the key answers to the question "Why Low Voltage?" In this design, a A step-down transformer sends a low-voltage current (no more than 36 Volts) through the space carbon fiber heating element, whose resistance produces enough radiant heat to safely warm the body to a pleasant temperature determined by you.
So safe, in fact that nails, water, and even touching the heating element during operation will have no harmful effect! You will have peace of mind as the systems are tested to UL standards and run on worry-free, low-voltage energy. In theory, even if the outer fabric were removed, you could connect the space carbon fiber heating element, turn it on, and walk directly on top of it, and not receive a shock, even if you were soaking wet.
Radiant heat is the most efficient form of heat available. Low-voltage radiant heat is between 97% and 100% efficient in converting electric power to heat. Other electrical heating approaches can be up to 40% less efficient. Significantly less operating time is required to maintain the desired warmth, keeping operational costs to a minimum.