The normal water content of the skin's epidermis is 10%-20%. If the water content gets lower than 10%, the skin will become dry and wrinkled. Direct spraying of ionized fog can increase the water content of outer cells and make the skin look more moist and elastic.
When the face is exposed to the ionized fog, the epidermal cells of the skin will expand and become softer as the fog penetrates. That makes it easier to clean aging skin, and makes the skin more air permeable and able to absorb skin care products.
Plenty of ionized fog makes the pores open. Nano-sized drops of the fog can penetrate into the skin easily, to loosen and clean the dirt, old skin deposits and excessive oil deep in pores and deeper skin layers. Then the skin can breathe freely.
PLATINUM NANO ION STEAMER FEATURES：
The Platinum Nano Ion Facial Steamer makes nano (extremely small, at less than 100 nm) ionized steam droplets, so that moisturizing steam can deeply penetrate the outer layers of your skin. Ordinary steamers produce droplets of about 8000 nm diameter, giving less skin penetration.
Steam formation begins almost immediately, while maintaining overheating protection.
Adjustable nozzle controls steam direction.
Steamer produces negative ions, so the steam cleans better than ordinary steam.
Cleansing steam opens skin pores and softens aged cutin, for better removal of dirt and dead skin cells, resulting in an improved skin tone.
The adjustable steam nozzle is designed to allow varying angles and positions.
Power Switch (ON/OFF)
The Platinum Nano Ion Steamer is controlled by a single touch ON/OFF button. Could not be easier to use!
*Color may be subject to change without notice
Ensuring Overflow Water Tray is in place, remove Tank Cover and unscrew the Tank Cap.
Fill the supplied measuring cup up to the 70 ml mark with pure or distilled water, and pour into the the Tank's opening.
Replace the Tank Cap and Tank Cover.
Plug in the steamer and press power switch to begin heating. The Indicator Light will illuminate and steaming will begin in approximately 30 seconds.
Keeping a comfortable distance from the steam, direct nozzle to steam the face and neck evenly for approximately 5 minutes.