This Acu Pen is designed to locate Acupuncture Points from the skin's surface.
3 levels of sensitivity
LCD displays accuracy percentage for acupoint location
Beeps when acupoint detected
With acupoint indicator light
Highly portable, fits in pocket.
The Acu Pen measures electrical resistance of the skin to accurately locate acupuncture points of the human body. Using an acupoints chart if needed, locate the approximate location of an acupuncture point; then scan this spot with the Acupuncture Pen, which emits an acoustic signal to indicate the exact location. This technique enables even lay people to locate the relevant points.
2. LCD Screen
3. DC Jack
4. Acupoint Indicator Light
5. Power Indicator
6. Battery Compartment
7. Power/ Sensitivity Button
Insert batteries by opening battery door at back of the Acu Pen. (Ensure correct polarity.)
Press POWER / SENSITIVITY BUTTON, hold for 3 seconds to power on. The red Power indicator light will come on and remain on until power-off.
Click the POWER / SENSITIVITY BUTTON for sensitivity level setting (3 levels)
Bring SENSOR in contact with skin and keep moving the SENSOR around the skin to search for acupuncture point locations. The beeper will continue to sound and the green acupoint indicator light will flash during the entire search for acupuncture points. The beeper sound frequency and indicator flash frequency will grow faster when closer to an acupuncture point area, and slower when moving away from an acupuncture point area.
Press and hold the POWER / SENSITIVITY BUTTON for 3 seconds to power off.
1. Remove the batteries from battery housing.
2. Clean the SENSOR head with small damp cloth.
POWER / SENSITIVITY BUTTON: While Acu Pen is powered off pressing and holding for 3 seconds will power on. While Acu Pen is on press and hold to power off.
Acupuncture Point Percentage display: This LCD display shows the Acupuncture Point Percentage reading from 1%~99% during search for acupuncture points (while device is on and sensor is in contact with skin). When beeper/light are signalling rapidly and LDC display reads over 90%, the Acu Pen is very near to an acupuncture point.
Sensitivity Setting: Each click of the POWER / SENSITIVITY BUTTON will change the sensitivity level (I, II, III). The most sensitive level is III and lowest is I.
Low Battery Display: When the low battery symbol flashes, a change to fresh batteries is required.
Auto Power Off: The Acu Pen will automatically power off after 2 continuous minutes of disuse.
Acu Pen Technical Specifications:
DC 3V (2 X LR44 button cell Batteries)
AcuPen with velour case
2 x button cell batteries (packed separately)
Dimensions / Weight
Acu Pen:138(L) x 23(W) x 10(H) mm
Package: 215(L) x 50(W) x 30(H) mm
Weight of Acu Pen:15 +/- 1g (including batteries)
Weight of the whole package 120g
This item is currently out of stock. Please try the left menu or
Search to find similar items.
For pain, alleviation of chronic pain, acute pain and post-injury discovery
Relieve Arthritis pain
Stimulate healing of wounds
Sports injuries such as tendon and ligament injuries
The same syndromes for which acupuncture may be applied
• Meridian points
• Painful areas
• Low impedance points
• Directly on the wound or treatment point
Distance from the treatment head: 0.5-1 cm, not more than 1 cm
10 times for one treatment session, once everyday or every two days, not over 30 minutes per treatment. More than 3 treatment sessions may be appropriate for the more severe syndromes. Allow a week of rest between two treatment sessions. If treating Meridian points, stimulate 2-6 points per treatment, and 30 seconds to 2 minutes for each point.
Advantages of Laser Over Needles
Painless and without numbing—this method is particularly useful for treating children and those afraid of needle treatment or who are prone to needle-sickness (tension, fainting etc.)
Harmless—since the energy penetrating into the skin is relatively low, it does not cause tissue damage nor the pneumothorax that can sometimes be caused by needles.
Complete sterility—the operation is simple and there is no worry of cross-infection through incomplete sterilization of needles.
Simple in operation—unlike needle application which requires a degree of skill in inserting and manipulation of needles.